Last updated on 2026-03-20 22:54:40 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 1.5.1 | 22.48 | 571.77 | 594.25 | ERROR | |
| r-devel-linux-x86_64-debian-gcc | 1.6.0 | 14.36 | 405.48 | 419.84 | OK | |
| r-devel-linux-x86_64-fedora-clang | 1.6.0 | 38.00 | 834.29 | 872.29 | OK | |
| r-devel-linux-x86_64-fedora-gcc | 1.6.0 | 37.00 | 858.69 | 895.69 | OK | |
| r-devel-macos-arm64 | 1.6.0 | 5.00 | 117.00 | 122.00 | OK | |
| r-devel-windows-x86_64 | 1.5.1 | 25.00 | 549.00 | 574.00 | ERROR | |
| r-patched-linux-x86_64 | 1.5.1 | 26.68 | 511.27 | 537.95 | ERROR | |
| r-release-linux-x86_64 | 1.5.1 | 19.35 | 505.22 | 524.57 | ERROR | |
| r-release-macos-arm64 | 1.5.0 | 8.00 | 106.00 | 114.00 | OK | |
| r-release-macos-x86_64 | 1.6.0 | 16.00 | 606.00 | 622.00 | OK | |
| r-release-windows-x86_64 | 1.5.1 | 24.00 | 533.00 | 557.00 | ERROR | |
| r-oldrel-macos-arm64 | 1.6.0 | 5.00 | 125.00 | 130.00 | OK | |
| r-oldrel-macos-x86_64 | 1.6.0 | 16.00 | 589.00 | 605.00 | OK | |
| r-oldrel-windows-x86_64 | 1.6.0 | 38.00 | 613.00 | 651.00 | OK |
Version: 1.5.1
Check: examples
Result: ERROR
Running examples in ‘WeightIt-Ex.R’ failed
The error most likely occurred in:
> base::assign(".ptime", proc.time(), pos = "CheckExEnv")
> ### Name: method_energy
> ### Title: Energy Balancing
> ### Aliases: method_energy
>
> ### ** Examples
>
> ## Don't show:
> if (rlang::is_installed("osqp")) withAutoprint({ # examplesIf
+ ## End(Don't show)
+ data("lalonde", package = "cobalt")
+
+ #Balancing covariates between treatment groups (binary)
+ (W1 <- weightit(treat ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
+
+ summary(W1)
+
+ cobalt::bal.tab(W1)
+
+ #Balancing covariates with respect to race (multi-category)
+ (W2 <- weightit(race ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATT",
+ focal = "black"))
+
+ summary(W2)
+
+ cobalt::bal.tab(W2)
+
+ ## Don't show:
+ }) # examplesIf
> data("lalonde", package = "cobalt")
> (W1 <- weightit(treat ~ age + educ + married + nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
Warning: ! The `polish` argument is deprecated.
ℹ Use `polishing` instead.
Error in eval(ei, envir) :
OSQP setup failed with error code 2: Solver settings validation.
Calls: withAutoprint ... <Anonymous> -> withVisible -> <Anonymous> -> osqp -> osqpSetup
Execution halted
Flavors: r-devel-linux-x86_64-debian-clang, r-patched-linux-x86_64
Version: 1.5.1
Check: examples
Result: ERROR
Running examples in 'WeightIt-Ex.R' failed
The error most likely occurred in:
> ### Name: method_energy
> ### Title: Energy Balancing
> ### Aliases: method_energy
>
> ### ** Examples
>
> ## Don't show:
> if (rlang::is_installed("osqp")) withAutoprint({ # examplesIf
+ ## End(Don't show)
+ data("lalonde", package = "cobalt")
+
+ #Balancing covariates between treatment groups (binary)
+ (W1 <- weightit(treat ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
+
+ summary(W1)
+
+ cobalt::bal.tab(W1)
+
+ #Balancing covariates with respect to race (multi-category)
+ (W2 <- weightit(race ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATT",
+ focal = "black"))
+
+ summary(W2)
+
+ cobalt::bal.tab(W2)
+
+ ## Don't show:
+ }) # examplesIf
> data("lalonde", package = "cobalt")
> (W1 <- weightit(treat ~ age + educ + married + nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
Warning: ! The `polish` argument is deprecated.
ℹ Use `polishing` instead.
Error in eval(ei, envir) :
OSQP setup failed with error code 2: Solver settings validation.
Calls: withAutoprint ... <Anonymous> -> withVisible -> <Anonymous> -> osqp -> osqpSetup
Execution halted
Flavors: r-devel-windows-x86_64, r-release-windows-x86_64
Version: 1.5.1
Check: tests
Result: ERROR
Running 'testthat.R' [305s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(WeightIt)
>
> test_check("WeightIt")
Saving _problems/test-moments-26.R
Saving _problems/test-moments-34.R
Saving _problems/test-moments-90.R
Saving _problems/test-moments-98.R
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
══ Skipped tests (3) ═══════════════════════════════════════════════════════════
• On CRAN (3): 'test-method_cbps.R:2:3', 'test-method_cbps.R:108:3',
'test-method_cbps.R:197:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-moments.R:21:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:30:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:85:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:94:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
Error:
! Test failures.
Execution halted
Flavor: r-devel-windows-x86_64
Version: 1.5.1
Check: tests
Result: ERROR
Running ‘testthat.R’ [253s/346s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(WeightIt)
>
> test_check("WeightIt")
Saving _problems/test-moments-26.R
Saving _problems/test-moments-34.R
Saving _problems/test-moments-90.R
Saving _problems/test-moments-98.R
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
══ Skipped tests (3) ═══════════════════════════════════════════════════════════
• On CRAN (3): 'test-method_cbps.R:2:3', 'test-method_cbps.R:108:3',
'test-method_cbps.R:197:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-moments.R:21:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:30:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:85:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:94:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
Error:
! Test failures.
Execution halted
Flavor: r-patched-linux-x86_64
Version: 1.5.1
Check: examples
Result: ERROR
Running examples in ‘WeightIt-Ex.R’ failed
The error most likely occurred in:
> base::assign(".ptime", proc.time(), pos = "CheckExEnv")
> ### Name: method_energy
> ### Title: Energy Balancing
> ### Aliases: method_energy
>
> ### ** Examples
>
> ## Don't show:
> if (rlang::is_installed("osqp")) withAutoprint({ # examplesIf
+ ## End(Don't show)
+ data("lalonde", package = "cobalt")
+
+ #Balancing covariates between treatment groups (binary)
+ (W1 <- weightit(treat ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
+
+ summary(W1)
+
+ cobalt::bal.tab(W1)
+
+ #Balancing covariates with respect to race (multi-category)
+ (W2 <- weightit(race ~ age + educ + married +
+ nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATT",
+ focal = "black"))
+
+ summary(W2)
+
+ cobalt::bal.tab(W2)
+
+ ## Don't show:
+ }) # examplesIf
> data("lalonde", package = "cobalt")
> (W1 <- weightit(treat ~ age + educ + married + nodegree + re74, data = lalonde,
+ method = "energy", estimand = "ATE"))
Warning: ! The `polish` argument is deprecated.
ℹ Use `polishing` instead.
Error in eval(ei, envir) :
OSQP setup failed with error code 2: Solver settings validation.
Calls: withAutoprint ... <Anonymous> -> withVisible -> <Anonymous> -> osqp -> osqpSetup
Execution halted
Examples with CPU (user + system) or elapsed time > 5s
user system elapsed
calibrate 3.806 0.109 5.83
Flavor: r-release-linux-x86_64
Version: 1.5.1
Check: tests
Result: ERROR
Running ‘testthat.R’ [252s/309s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(WeightIt)
>
> test_check("WeightIt")
Saving _problems/test-moments-26.R
Saving _problems/test-moments-34.R
Saving _problems/test-moments-90.R
Saving _problems/test-moments-98.R
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
══ Skipped tests (3) ═══════════════════════════════════════════════════════════
• On CRAN (3): 'test-method_cbps.R:2:3', 'test-method_cbps.R:108:3',
'test-method_cbps.R:197:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-moments.R:21:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:30:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:85:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:94:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
Error:
! Test failures.
Execution halted
Flavor: r-release-linux-x86_64
Version: 1.5.1
Check: tests
Result: ERROR
Running 'testthat.R' [300s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(WeightIt)
>
> test_check("WeightIt")
Saving _problems/test-moments-26.R
Saving _problems/test-moments-34.R
Saving _problems/test-moments-90.R
Saving _problems/test-moments-98.R
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
══ Skipped tests (3) ═══════════════════════════════════════════════════════════
• On CRAN (3): 'test-method_cbps.R:2:3', 'test-method_cbps.R:108:3',
'test-method_cbps.R:197:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-moments.R:21:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:30:5'): moments works as expected, binary ──────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:85:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
── Failure ('test-moments.R:94:5'): moments works as expected, multi ───────────
Expected `{ ... }` not to throw any conditions.
Actually got a <simpleWarning> with message:
! The `polish` argument is deprecated.
i Use `polishing` instead.
[ FAIL 4 | WARN 0 | SKIP 3 | PASS 2061 ]
Error:
! Test failures.
Execution halted
Flavor: r-release-windows-x86_64